< >
Home » Pixhawk无人机教程 » Pixhawk无人机教程-7.3 APM board connections

Pixhawk无人机教程-7.3 APM board connections

APM board connections

ContentAPM board connectionsAPM 2.5 board connection points.APM 2.5 Exploding Graphic and Detailed description of Options[common_page]


APM 2.5 board connection points. apm_overview 1. Outputs and Inputs

Common negative-rail (pins closest to edge “-”) provides a negative path to complete power and signal circuits
Separate positive-rails (central pins “+”) for low-level power distribution
Individual sensor/signal pins (inner pins “S”) output control signals to motor-ESCs and take-in RC input signals from the Rx

  1. Micro USB

Direct connection to a computer

  1. Power Module

Provides power input and battery monitoring capability

  1. 3DR Radio

Two-way wireless telemetry and control

5.GPS

Input from GPS receiver (Rx)

  1. Analog I/O

Common negative-rail (outer “-”) shared with Inputs and Outputs
Positive-rail (center “+”) is connected with the positive rail on the Inputs
Individual signal pins (inner “S”) connect with servos and sensors

  1. I2C connection.

Inter-Integrated Circuit, a type of serial bus. This allows multiple peripheral devices to be connected with a single port

  1. Jumper-JP1

Connects the positive-rail of the Outputs to the positive-rails of the Inputs-Analog (details)

  1. Optional I/O ports

Anti-vibration techniques, methods and “tuning” are covered in greater detail in the Anti-Vibration section of the Wiki: (Here!)

A 3/4″ inch square Kyosho Zeal Gel or Moon Gel pad under each corner of the flight controller, lightly secured by a Velcro strap with 1/2″ of foam under it will normally provide sufficient vibration damping.

Compensation for Magnetometer interference from the motors is covered: (Here!)


APM 2.5 Exploding Graphic and Detailed description of Options Select this Link For a look inside the case and a detailed description of options.
Questions about this page? Comments? Suggestions? Post to APM Forum! Use the platform specific to your query, and make sure to include the name of the page you are referring to.
</article>

纠错,疑问,交流: 请进入讨论区点击加入Q群

获取最新文章: 扫一扫右上角的二维码加入“创客智造”公众号


标签: none